The Cloud-based Load Testing (CLT) REST APIs give you the ability to execute Load tests from the Cloud in an automated manner, that can be integrated either as part of your Continuous Integration/Deployment pipeline or Test Automation.
Here’s a list of what you can do with these new APIs:
- Create/Start/Stop a Load Test Run
- Get Load Test Results - the set of KPIs groups that you are used to – Performance, Throughput, Application
- Get Messages from the service during a run
- Get Exceptions, if any, from the service during a run
- Get Counter instances and Samples for a Load Test run
- Get Application Counters for Apps configured with your load test
- Get list of all past Load test Runs - filtered by requester, date, status etc..
Please note that:
- For using the REST APIs, you’ll need to enable alternate credentials, and use that for authentication
- Add "vsclt" to your account name to get redirected to the Cloud-based Load Test (CLT) service within visualstudio.com. If your account is https://abc.visualstudio.com/, then when using APIs, specify this as https://abc.vsclt.visualstudio.com/
The base API pattern is:
VERB https://{account}.vsclt.visualstudio.com/_apis/clt/{resource}[/{options}]
Where "resource" can be one of the following and "options" depend on the resource:
Test
- for "Test Runs" (queued test runs): testruns
- for "Test Drops" (the tests store containers): testdrops
Depending on Test Runs
- for "Counter Instances": testruns/{testrunid}/counterinstances
- for "Counter Samples": testruns/{testrunid}/countersamples
Application Performance Management:
- for "APM Plugins": apm/plugins
- for "APM Applications ": apm/applications
- for "APM Counters ": apm/counters
Create a Test Run
To create a Cloud Load Test Run, you have to make a POST call to the API, passing a set of parameter and test settings like in the example below.
Request Url:
POST https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns
Request Body:
{
"name": "MyAppToTest.loadtest",
"description": "nightly loadtest",
"testSettings": {
"cleanupCommand": "",
"hostProcessPlatform": "x86",
"setupCommand": ""
},
"testDrop": {
"id": "fe35ed32-eaab-4178-ba7e-ad2577ee187f"
}
}
Response:
{
"id": "a5e0d4b9-d387-4b3e-9566-163da9c39b67",
"name": "MyAppToTest.loadtest",
"createdDate": "2014-11-1T08:51:27.0965365Z",
"state": "pending",
"subState": "none",
"testSettings": {
"cleanupCommand": "",
"hostProcessPlatform": "x86",
"setupCommand": ""
},
"testDrop": {
"id": "fe35ed32-eaab-4178-ba7e-ad2577ee187f",
"url": "https://dbtek.vsclt.visualstudio.com/_apis/clt/TestDrops/fe35ed32-eaab-4178-ba7e-ad2577ee187f"
},
"runSpecificDetails": {
"duration": 180,
"virtualUserCount": 250,
"samplingInterval": 15
},
"createdBy": {
"id": "76cabfe4-0e20-4f5b-862e-9693a68232f1",
"displayName": "iamtheuser@dbtek.it"
},
"url": "https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67"
}
As you can see, in the response you'll find all the data you need related to the newly created test run.
Start a Test Run
With those data, we can for example start (queue) the test run, calling the API with a PATCH verb:
Request Url:
PATCH https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67
Request Body:
{
"state": "queued"
}
Response:
Status code: 202
Get Test results
Finally, when the test finished, we can get the test run results, with a GET call.
Request Url:
GET https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67/results
Response:
{
"resultsUrl": "http://127.0.0.1:10000/devstoreaccount1/ets-containerfor-aeee0697-d734-43d7-956e-e662252c265c/2150fbd4-e71c-42fd-8b90-95222a556d87/TestResult/LoadTest.ltrar.zip?sv=2012-02-12&se=2014-06-03T05%3A05%3A39Z&sr=b&si=sas_tenant_policyaeee0697-d734-43d7-956e-e662252c265c&sig=n1Tj%2BsCtiOqQu9UtcXsl%2Bn3ixP%2FVebHCKDJvfD5Tr%2FE%3D",
"counterGroups": {
"count": 3,
"value": [
{
"groupName": "Performance",
"url": "https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67/CounterInstances?groupNames=Performance"
},
{
"groupName": "Throughput",
"url": "https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67/CounterInstances?groupNames=Throughput"
},
{
"groupName": "Application",
"url": "https://dbtek.vsclt.visualstudio.com/_apis/clt/testruns/a5e0d4b9-d387-4b3e-9566-163da9c39b67/CounterInstances?groupNames=Application"
}
]
}
}
Get Test errors
You can also retrieve a list of errors that eventually happened during the test. Again, use a GET call.
Request Url:
GET https://dbtek.vsclt.visualstudio.com/_apis/clt/testRuns/47be20f0-ac4a-40cd-acb7-d9f8c44d0404/Errors
Response:
{
"count": 2,
"value": [
{
"type": "Exception",
"subType": "UriFormatException",
"occurrences": 50,
"testCaseName": "ErrorsAndExceptionsWebTest",
"scenarioName": "LoadTestingScenarioWarmupDuration",
"request": "http://www.bing:123.com/----{GET}",
"stackTrace": " at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)\n at System.Uri..ctor(String uriString, Boolean dontEscape)\n at Microsoft.VisualStudio.TestTools.WebStress.WebTestTransaction..ctor(String requestUrl)\n at Microsoft.VisualStudio.TestTools.WebStress.WebTestInstrumentedTransaction.CreateTransaction()\n at Microsoft.VisualStudio.TestTools.WebStress.WebTestInstrumentedTransaction.Execute(WebTestCaseContext testCaseContext, AsyncCallback completionCallback, Object callerState)",
"messageText": "Invalid URI: Invalid port specified.",
"lastErrorDate": "2014-11-11T09:14:20.363Z"
},
{
"type": "ExtractionRuleError",
"subType": "ExtractText",
"occurrences": 50,
"testCaseName": "ErrorsAndExceptionsWebTest",
"scenarioName": "LoadTestingScenarioWarmupDuration",
"request": "http://www.bing.com/----{GET}",
"stackTrace": "",
"messageText": "StartsWith text was not found in the response",
"lastErrorDate": "2014-11-11T09:14:23.663Z"
}
]
}
No comments:
Post a Comment